Laser resurfacing improves tone, texture, fine lines and sun damage by creating controlled micro-injury that the skin repairs. Ablative CO2 lasers such as eCO2-3D remove tiny columns of tissue for stronger correction and longer recovery. Non-ablative lasers such as Mosaic 3D and ULTRA heat tissue without removing the surface, so recovery is shorter and results build over a series.
Key takeaways
- Ablative means tissue is removed. Non-ablative means tissue is heated but the surface stays in place.
- More correction per session generally means more downtime.
- ULTRA is the lightest option here, Mosaic 3D is the middle, and eCO2-3D is the most intensive.
- At Glowtique, starting prices are $575 (ULTRA), $900 (Mosaic 3D) and $1,500 (eCO2-3D).
- Sun protection before and after treatment is essential, especially in Florida.
Laser resurfacing is one of the most searched anti-aging treatments in Southwest Florida, and one of the most confusing. Fractional, ablative, non-ablative, CO2: the vocabulary alone can make you close the browser tab. This guide compares the three resurfacing lasers we use at Glowtique in Naples so you can see where each one fits.
How laser resurfacing works
All three lasers here are fractional. Instead of treating the whole surface, the laser creates thousands of microscopic treatment zones and leaves the skin between them untouched. That untouched skin speeds healing. As the treated zones repair, the skin produces new collagen and sheds damaged, pigmented cells.
The key difference is what happens inside each tiny zone:
- Ablative lasers vaporize a microscopic column of tissue. This gives the strongest resurfacing effect and requires real recovery time.
- Non-ablative lasers heat the column without removing the surface. Recovery is easier, and improvement builds over several sessions.
Side-by-side comparison
| ULTRA | Mosaic 3D | eCO2-3D | |
|---|---|---|---|
| Type | Non-ablative fractional | Non-ablative fractional | Fractional CO2 (ablative) |
| Best known for | Glow, tone, sun spots, early texture | Texture and fine lines, including around eyes and mouth | Wrinkles, scars, significant sun damage |
| Typical recovery | Minimal | About 2 to 5 days | 6 to 48 hours of redness for light settings; a week or longer for deeper settings |
| Numbing | Optional, depending on settings | Recommended for most treatments | Usually applied |
| Sessions | Often a series | Usually 2 to 4 | One major session or a lighter series |
| Starting price | $575 | $900 full face | $1,500 light treatment |
ULTRA: the low-downtime refresher
ULTRA is a non-ablative fractional laser designed to improve tone, texture and luminosity, and to soften the look of sun-related discoloration such as age spots and freckles. Discomfort is typically mild to moderate depending on settings. The manufacturer, Cynosure, notes it can be used on all skin types throughout the year, which is useful in a climate with no real off season for sun.
At Glowtique, ULTRA is paired with a targeted topical finish. There are four versions, from the ULTRA Glow Vitamin C Facial at $575 to the ULTRA Platinum R Facial at $720. See the ULTRA menu.
Mosaic 3D: the middle path
Mosaic 3D is also non-ablative, with more emphasis on texture and fine lines, including the delicate areas around the eyes and mouth. A facial session typically takes 20 to 35 minutes. Recovery usually lasts 2 to 5 days: mild redness and swelling for up to 48 hours, followed by several days of dryness. A series of 2 to 4 treatments is usually recommended.
Pricing starts at $900 for the full face and $1,100 for face and neck, with three-treatment packages available. See Mosaic 3D details.
eCO2-3D: the strongest correction
eCO2-3D is a fractional CO2 laser. CO2 is the classic ablative wavelength, used for wrinkles, acne scars and other scars, textural irregularities and sun-related changes. Depth is adjustable, and so is recovery: lighter, peel-style settings may mean 6 to 48 hours of redness, while deeper resurfacing can take a week or longer to heal.
Glowtique offers four levels, from a Light Treatment at $1,500 to a comprehensive One and Done session at $6,000. See eCO2-3D details.
Have a question about Anti-Aging Laser Treatments? Book a consultation online, call (239) 977-4569, or email our team and we will reply with details.
How to choose
- Start with the concern. Dullness and spots point toward ULTRA. Lines and texture point toward Mosaic 3D. Deeper wrinkles and scars point toward CO2.
- Be honest about downtime. If you cannot stay out of the sun or off camera for a week, choose a lighter laser and plan a series.
- Share your skin history. Skin tone, tanning habits, cold sore history and medications all affect which laser and settings are appropriate.
- Plan around the Florida sun. Freshly treated skin is more vulnerable to UV. Many locals schedule deeper treatments when they can avoid beach and boat days.
The American Academy of Dermatology recommends broad-spectrum sunscreen with SPF 30 or higher every day. After any resurfacing treatment, follow your provider’s sun-avoidance instructions exactly. It protects both your skin and your results.
What resurfacing does not do
Lasers refine the surface and upper layers. They are not designed to lift significant laxity along the jawline or neck. For loss of firmness, radiofrequency tightening such as XERF works on a different layer. Many women address firmness and surface quality as two separate steps.
Frequently asked questions
What is the difference between ablative and non-ablative lasers?
Ablative lasers, such as fractional CO2, remove microscopic columns of skin tissue for stronger resurfacing and longer recovery. Non-ablative lasers heat the tissue without removing the surface, so recovery is shorter and results build over a series of treatments.
How long is recovery after laser resurfacing?
It depends on the laser and settings. At Glowtique, ULTRA has minimal downtime, Mosaic 3D recovery typically lasts 2 to 5 days, and eCO2-3D ranges from 6 to 48 hours of redness at light settings to a week or longer for deeper resurfacing.
How many laser treatments will I need?
Non-ablative lasers are usually done in a series. Mosaic 3D is typically recommended as 2 to 4 treatments. With fractional CO2, some people choose one more intensive session and others choose several lighter ones. Your provider will recommend a plan at consultation.
How much does laser resurfacing cost in Naples, FL?
At Glowtique Salon & MedSpa, starting prices as of November 2026 are $575 for ULTRA facials, $900 for Mosaic 3D full face and $1,500 for an eCO2-3D light treatment. Payment plans are available.
Is laser resurfacing safe for darker skin tones?
Some lasers and settings are more suitable than others for deeper skin tones. Cynosure notes that ULTRA can be used on all skin types. A provider should assess your skin and adjust the plan to reduce the risk of pigment changes.
Talk with the Glowtique team
Tell us what you would like to improve and we will explain your options, expected recovery and pricing before you decide anything.
Book a consultationEmail us for detailsRelated: Anti-Aging Laser Treatments at Glowtique in Naples, FL · Menopause and your skin
Sources
- Glowtique Salon & MedSpa. eCO2-3D treatment information and pricing, November 2026.
- Glowtique Salon & MedSpa. Mosaic 3D treatment information and pricing, November 2026.
- Glowtique Salon & MedSpa. ULTRA treatment information and pricing, November 2026.
- American Academy of Dermatology. Caring for your skin in menopause (sunscreen guidance).
This article is for general education and is not medical advice. Services at Glowtique Salon & MedSpa are provided after an individual consultation; results, the number of sessions and recovery vary from person to person, and no outcome is guaranteed. Prices shown are starting prices as of November 2026 and may change. Device and brand names are trademarks of their respective owners.





